FFA Generation 2 DSP 4 channel amplifiers feature powerful digital signal processing (DSP). The DSP controlled amplifier provides a cost effective solution for sound system design and can be used for installation or temporary sound systems or any high quality amplified audio requirement. The system is controlled by software called FATWARE. The software is intuitive to use and offer the user a toolbox of audio functions to allow many different systems to be designed.
Suitable Applications
Medium to larger full range and dedicated bass loudspeakers, bi amplified stage monitor systems, components within large format touring or installation loudspeakers low mid, high mid and HF, 4 ohm drive.
Medium to large full range loudspeakers 10”-15” drivers + 1” 1.5” HF
Low mid, high and HF in larger multi way systems installed or touring.
High power stage monitors 2×12” or 15” +1.5”
Medium bass 2×12” 15” or 1×18”
Use in conjuction with high power bass amplifiers signal driven from auxillary outputs on rear of DSP amplifier.
4 x 1500 Watts @ 4 Ohms
compressor limiter on each input
6 band parametric EQ per input, 8 band parametric per output, low/high shelving, bell, notch filters, phase, band pass
2 band dynamic EQ input and output
Audio input and compressor/limiter
loudspeaker signal limiting
cross over filter types 6,12,18,24,48 dB per octave But, Bes, LR
Delay – up to 2 seconds, (feet, inch, mm, meters, millisecond).
4 audio inputs, 6 audio outputs.
AES/EBU digital input selectable by a switch on the rear panel
Ethernet network
DSP defeat switch so that the amplifier easily reverts back to a 4 input analogue amplifier.
Front panel level trim using analogue potentiometer, front panel LED signal potentiometers.
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
1 | ||||||
2 | 3 | 4 | 5 | 6 | 7 | 8 |
9 | 10 | 11 | 12 | 13 | 14 | 15 |
16 | 17 | 18 | 19 | 20 | 21 | 22 |
23 | 24 | 25 | 26 | 27 | 28 | 29 |
30 |
>> Click here to book dates to hire this product
